Eni-Florence Battery Joint Stock Company
Add: Lot C12 - Khanh Phu Industrial Zone - Yen Khanh - Ninh Binh - Vietnam
Tel: (+84)2293 762 678 Fax: (+84) 303 762 345
Email: contact@eni-florence.com

Specifications

Nominal Voltage (V)12 V
Nominal Capacity20 hour rate (3.0A to 10,50 V) 60 Ah
WeightApprox. 16.0 ± 3% Kg (35.27 ± 3% Lbs)
Cold Cranking Amperes (-17.8°C)600 A
Storage Capacity (RC, 25A duration time)98 min
Design life at 25°C3~5 year
Case MaterialPP
Terminal T2 (AS series -IEC60095-2:2009)mm (inch)
Troy CMF55D23R
Girl in a jacket
Dimension mm(inch)
Length (L)232 +- 2 (9.13 +- 0,08)
Width (W)171 +- 2 (6.73 +- 0,08)
Height (H)200 +- 2 (7.87 +- 0,08)
Overall Height (HT)222 +- 2 (8.74 +- 0,08)
Girl in a jacket
Chargin Method
Chargin Method
1. Charging at constant voltage and constant Current (two step method)
StepChargin VoltageChargin currentChargin time
114,8 +- 0,1VMax 15.0 A20h
2-3.0 A4h
2. Charging at constant +Current (one step method)
StepChargin VoltageChargin currentChargin time
1-6.0AUntil voltage Stabilisation is established when three consecutive voltage or specific density measurements taken at 15 mins interrvals, remain constant
Operating Temperature Range

- Nominal Operating Temperature : 25℃ (77℉) 
- Storage: 5℃ ~ 40℃ (41℉~104℉)
- Discharge : -30℃ ~ 60℃ (-22℉~140℉)
- Charge: -30℃ ~ 60℃ (-22℉~140℉)
- High current charging at high temperatures above 50 degrees Celsius may cause acid leakage in the air outlet.

Storage

Can be stored up to 6 months at 25℃ (77℉);
- If the battery is below 12.4V , battery must be recharged as soon as possible to prevent lead sulfation;
- Fully recharging is required before usage, and charged sooner if stored at higher temperature than 25℃ (77℉)

Export: Tell (+84)2293 762 678
DaNang Office: Tell (+84)2293 762 678
HCM Office: Tell (+84)2839 453 447